Crankshaft Position Sensor 93-96 Dodge Jeep 56027280 PC42

Bookmark and Share

* NOTE: In order to avoid return hassle and save yours and our time, you must cross-check provided OE reference part numbers against those found on your current unit. Do not rely on the compatibility charts, these are presented for the reference purpose only and should not be your guide to determine compatibility. If you are unsure, you may call local dealership (auto parts dept.) to obtain correct part numbers or ask your mechanic. If you would like us to help you, please use our Contact Us form and provide your vehicle's detailed info such as: Make/Model/Year/Engine/Full VIN# and we will do our best to find compatibility.

  • Model: 3019
  • UPC: 56027280
  • Shipping Weight: 0.7lbs
  • Manufactured by: Aftermarket


Add to Cart:

$34.95  $24.98
Save: 29% off
OE Reference Codes:
OEM: AC DELCO:
56027280
56026884
2132068
213-2068
STANDARD MOTOR: AIRTEX/WELLS:
PC42 5S1805
SU367
CSK/NIEHOFF: DELPHI:
AL2019 ᅠSS10180-11B1
BORG WARNER BWD: KEMPARTS:
CSS53 ᅠ147-618

*Cross-check indicated OEM reference codes against those found on your current unit. You may call local dealership (auto parts dept.) to obtain correct part numbers or ask your mechanic.


List of compatible vehicles:

*Direct replacement for the following OE part numbers: 56026884, 56027280, SU367, 5S1805, 213-2068, CSS53, PC42, SS10180-11B1, 147-618, AL2019. Models presented for the reference purpose only!


Year:
Make:
Sub-model:
Engine:
Notes:
1990-1993
DODGE
DAKOTA
2.5L L4 SOHC

1993
JEEP
GRAND WAGONEER
5.2L V8

1993-1996
JEEP
GRAND CHEROKEE
L6-242ci 4.0L
F/I Vin S
1993-1995
JEEP
WRANGLER
L6-242ci 4.0L
F/I Vin S

*May fit other makes-models not listed.

Note: The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the ECU to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor. Typically a Hall Effect sensor is used as the static part requiring a magnet to be mounted somewhere in the periphery of the rotating disc, but other detection principles can also be employed i.e. optical or inductive.

Important: Please check compatibility prior to purchasing. Cross-check OE reference numbers presented in this description against those found on your current unit. If you are not able to locate part numbers, please call local dealership (auto parts department), provide your vehicle information and obtain correct part number(s). Feel free to contact us if you have any questions.

Why pay much higher price for the same quality by ordering from dealership? Compare to the dealer's price and save a lot!


Add to Cart:


Copyright © 2017 pgautoparts.com